CCG Cable Glands - Contact us via email
Home
Why use CCG?
Products
Glands
- Industrial
Junction Boxes
- Industrial
    3-Way Bottom Entry™ Box   images/products/thispagearrow.jpg
    Foundation Box   images/products/thispagearrow.jpg
    Handi Fit™ 4-Way Box   images/products/thispagearrow.jpg
    Handi Fit™ H Box   images/products/thispagearrow.jpg
    Handi Fit™ Y Box   images/products/thispagearrow.jpg
    Newcastle Box   images/products/thispagearrow.jpg
    Roof Box   images/products/thispagearrow.jpg
    Utility™ Box   images/products/thispagearrow.jpg
Search
Technical Info
News
Contact Us
Worldwide
Distribution
Testimonials
QuickStop-Ex

 

 

 

 

 

 

 

 

Mining and Industrial Boxes

CCG 3-Way Bottom Entry™ Box IP66/67/68

   for Industrial, Commerical and Mining Electrical Installations
Features and Benefits
  • 3-Way Bottom Entry™  Box for industrial and mining area lighting applications.
  • Screw-on lid provides ease of installation. Lid locking with a special key prevents unauthorized tampering.
  • 20mm Box supplied complete with safety securing lid lanyard. 
  • Only approved CCG cable glands and terminals must be used.
  • No exposed metal parts.
  • Dust and water proof to IP66/68 when used with CCG sealed cable glands.
  • No drilling or tapping of cable entries required.
  • Mounting studs provided for DIN rail if using Terminal Blocks. 
  • Internal earthing to all entries and rail provided. 
  • Red Fire Rated Box for emergency circuits available (925oC for 3-hours).
Installation:
  • Installation must be carried out by a competent person.
  • Do not install under live current conditions.
  • The box must not be modified in any way, as this will invalidate the certification.
  • All wiring must be carried out in accordance with the relevant Codes of Practice.
  • The wiring insulation must not extend by more than 1.0mm from the metal face of the terminal.
  • The voltage and current value of the box must not be exceeded. 
  • See relevant certificate for current limitations for conditions of use / schedule of limitations.
  • Only those terminals shown in the terminal schedule may be incorporated in the box.
  • Inner cable bedding must protrude into the box by a minimum of 20mm past the cable entry point.
  • Not more than one single or multiple strand lead shall be connected into either side of the terminals.
  • Only earth conductors of equal size shall be connected with rail mounted terminals.
  • All terminal screws used and unused shall be tightened.
  • A parallel shaft screw driver of the correct size should be used for rail mounted terminals screws.
  • Where cables enter the box they must be secured by CCG Cable Glands appropriate to the make up of the cable. 
  • Unused entry apertures must be blanked with certified CCG Blanking Plugs.
  • To maintain IP66/68 a thread seal gasket between the box and cable gland must be installed.
  • Before replacing the lid, ensure the lid gasket is in place.
  • The use of a CCG Box Spanner (Lid Locking Key) is required to maintain the tamper proof integrity of the box.

Technical Data
Download PDF

Certifications
Download MASC 12-145
Home | Products | Search | Technical Info | News | Contact us |
 
All content copyright © 2004 - 2008  CCG Cable Terminations Pty Ltd

33/37 Forge Road - Spartan - Gauteng - South Africa
P O Box 192 - Kempton Park - 1620 - Gauteng - South Africa
Tel: +27 11 394-2021   Fax: +27 11 975-5825    Email: ccg@icon.co.za