CCG Bottom Entry Angle™ Box Ex e IIC, Ex nA IIC, Ex t IIIC, IP66/68
for Hazardous Installations
Features and Benefits
Bottom Entry Angle Box for hazardous area lighting applications. (Industrial version also available)
Screw-on lid provides ease of installation. Lid locking with Special key prevents unauthorized tampering.
No exposed metal parts.
Dust and water proof to IP66/68 when used with CCG sealed cable glands.
No drilling or tapping of cable entries required.
Bottom Entry Angle Box is angled to allow ease of termination and inspection.
Mounting studs provided for DIN rail if using Terminal Blocks. Internal earthing to rail and gland entries provided.
Conditions and limitations for safe use
The CCG lid locking key must be used to open and close units that do not have locking screws such as “clear cover units”.
When fitted with the polycarbonate (clear) cover the equipment must be installed to prevent the generation of electrostatic charge.
When fitted with the clear lid, the unit must be installed to prevent UV exposure to the internal components fitted.
Only the terminal blocks as per the description may be utilised in the junction box. Specific installation conditions as set by the terminal manufacturer / terminal certification must be considered. This includes considering the use of the applicable partitions and end plates for terminal blocks, conductor installation, tightening down of terminal block screws etc.
Terminal blocks may only be utilized on the applicable rail and must allow sufficient space to make connections and to close the cover / lid.
The creepage and clearance between terminal blocks and from the terminal block to any earthed / bonded metallic part must comply with IEC 60079-7 requirements for the applicable voltage of the terminal blocks.
Suitably certified glands / plugs must be used in the threaded entries.
Information with relation to entries is indicated in the instructions.